Flashcards in NAMP Ch. 7 Deck (51):
Which program provides a systematic and efficient method for gathering, analyzing, and maintaining information on the quality characteristics of products, the source and nature of defects, and their immediate impact on the current operation?
Quality Assurance (QA)
Which Quality Assurance (QA) term is defined as the examination and testing of supplies and services that include raw materials, components, and intermediate assemblies, to determine whether they conform to specific requirements?
Which Quality Assurance (QA) term is defined as a periodic or special evaluation of details, plans, policies, procedures, products, directives, and records?
Which Quality Assurance (QA) term is defined as an ongoing review of details, plans, policies, procedures, products, directives, and records?
How often at a minimum must O, I, and D-level Quality Assurance (QA) accompany Collateral Duty Inspectors (CDIs) during scheduled and unscheduled maintenance tasks to recheck their qualifications?
How many months at a minimum must be completed Functional Check Flight (FCF) checklists be retained in aircraft history files?
What is the Quality Assurance Representative/Inspector Recommendation/Designation form number
The Officer in Charge (OINC) of a detachment may designate Quality Assurance (QA) personnel if all procedures and requirements for designating Quality Assurance (QA) personnel are accomplished by the detachment and the deployment is in excess of how many days?
What are provided for certain maintenance tasks that, if improperly performed, could cause equipment failure or jeopardize the safety of personnel?
Quality Assurance (QA) Maintenance Requirement Cards (MRCs)
Which type of inspections are specific Quality Assurance (QA) functions required during the performance of maintenance requirements and actions where satisfactory task performance cannot be determined after the task has been completed?
Who oversees and coordinates the efforts of the Quality Department?
Director of Quality
Quality Assurance (QA) stamps may not be reassigned within a period of how many months?
Which maintenance level do Quality Assurance (QA) specialists have to be at to accomplish Type I verifications?
What is the minimum paygrade required to be appointed as a Quality Assurance Representative (QAR)?
Who perform, administer, monitor, and review processes and practices t ensure the quality of maintenance performed for the Department of Defense (DoD)?
Quality Assurance (QA) specialists
What is the Artisan Inspector Designation form number?
How often at a minmum must a working-level forum be held by the area Quality Assurance Specialist with the Artisan Inspectors (AIs) to evaluate program performance, monitoring results and improvement opportunities?
How often are executive-level forums held by the Director of Quality with the D-level Fleet Readiness Center (FRC) Commanding Officer (CO) to review program performance and process monitoring results of all areas?
What provides a central source of up-to-date information for use of all personnel in the performance of their work?
Central Technical Publications Library (CTPL)
Technical Manual Application Systems (TMAPS) along with what else are the only authoritative source for all technical data, whether pre-flight, in flight, or post flight for aircraft/engines or any equipment/systems supporting naval operation?
Joint Knowledge Caching Servers (JKCS)
Which central repository is the authoritative source for Central Technical Publications Libraries (CTPLs) to validate the most current copies of technical manuals and associated records maintained in individual command Enhanced Library Management System (ELMS) accounts?
Technical Manual Application Systems (TMAPS)
Which publication contains detailed procedures for establishing and operating Central Technical Publications Libraries (CTPLs)?
How many calendar days does Naval Air Technical Data and Engineering Center (NATEC) have to respond directly to activities that sent an assistance request letter because they were unable to locate applicable COMNAVAIRSYSCOM approved technical publications or determined that the publication does not exist?
Which publications provide a basis for planning, scheduling, and complying with scheduled maintenance requirements?
Planned Maintenance System (PMS)
What provide the instructions required for the efficient performance of scheduled maintenance requirements?
Maintenance Requirement Cards (MRCs)
what indicate which Maintenance Requirement Cards (MRCs)are to be complied with, the numbers and specialties of personnel required, times during which the separate jobs are scheduled for completion, Power/Air off or on conditions required during the work, and the area where the work is to be performed?
Sequence Control Cards (SCCs)
Which instruction contains instructions for maintenance personnel participation in command aviation safety programs?
Quality Assurance (QA) must visually review every welder's proficiency against the welder's test plate every how many days?
What the Support Equipment (SE) Misuse/Abuse form number?
How many years must completed Support Equipment (SE) Misuse/Abuse report forms be retained for?
Which program was designed to ensure safe environment when working on aeronautical equipment fuel cells and tanks?
Aircraft Confined Space Program
Which program contains Aircraft Confined Space Program and Entry Authority (EA) certification requirements?
Which term is generally defined as the probability that an item will successfully perform its designated function for a specified period of time under specified operational conditions?
Which maintenance concept is naval aviation dedicated to applying to in-service and future aircraft, engines, aircrew systems, weapon systems, aircraft launch and recovery equipment, and Support Equipment (SE)?
Reliability Centered Maintenance (RCM)
What program provides monitoring, analysis, and specialized knowledge to initiate preventive actions that are effected by engineering, production, and other departments?
Depot Level Quality Program (DLQP)
What is the material Inspection and Receiving Report form number?
Which term refers to the determination of product conformance by actual examination, measurement, witnessing of tests, witnessing redundant or concurrent certification, or review of documented objective evidence describing product or quality characteristics and comparison to prescribed quality requirements?
Which verification category is assigned to characteristics which would be classified as critical if found defective?
Which verification category temporarily imposes mandatory verification requirements and may be conducted on high failure rate items?
Which type of audits are independent reviews conducted to compare some aspect of performance with set quality standards for that performance?
Which type of action is defined as the resolution of a problem of deficiency?
Which information Technology (IT) system will be used to document corrective and preventive actions?
Electronic Continual Analysis and Metrics (eCAM)
How many different ways are deficiencies classified as?
Which type of deficiency is a defect that judgment and experience indicate is likely to result in hazardous or unsafe conditions for individuals using or maintaining it?
Which type of deficiency is a defect that is likely to result in the failure or reduced material utility of a unit or product?
Which type of deficiency is a defect that isn't likely to materially reduce the utility of a unit or product or is a departure from established standards have little bearing on the use or operation of a unit?
Which automated system collects procedural deviations and deficiencies?
Process Correction Reporting System
Which program was established to ensure the customer receives a product which satisfies their needs and requirement?
What systematically evaluates non-conforming material in order to achieve material recovery and savings?
Material Review Board (MRB)
How many workdays after the Material Review Board (MRB) form has been prepared must Material Review Board (MRB) action commence?