Shoulder ID/Blueprint

Question 1

What are ShoulderID baseplate size and post length options?

Answer 1

Baseplate - 25mm & 29mm
Post Lengths - 15mm, 25mm, 35mm

Question 2

What post “types” are offered?

Answer 2

Centered or +3mm offset

Question 3

+3mm offset post offered in ONLY which post lengths?

Answer 3

25mm & 35mm

Question 4

What is size of “gold” boss drill diameter?

Answer 4

7.8mm

Question 5

How much press fit do you get from using “gold” boss drill in relation to the boss on the baseplate?

Answer 5

Boss on Shoulder ID = 8.6mm
0.2mm diametrically at post
0.6mm diametrically at post pads

Question 6

How much press fit do you get from using the hard bone post drill?

Answer 6

Line to Line
Boss on Shoulder ID = 8.6mm
Hard Bone Post Drill = 8.6mm

Question 7

How much press fit do you get from “chamfer” drill?

Answer 7

Line to Line from first 8mm of post hole
Tip of Chamfer = 7.5mm
Middle to Stop = 8.6mm
Length = 20mm

Question 8

What’s minimum peripheral screw length you should use with less than 5mm of augment thickness?

Answer 8

26mm

Question 9

What’s minimum peripheral screw length you should use with 5mm-10mm of augment thickness?

Answer 9

30mm

Question 10

What’s minimum peripheral screw length you should use with more than 10mm of augment thickness?

Answer 10

34mm

Question 11

What’s the MAX augment thickness in 15mm post length for Shoulder ID?

Answer 11

Center = 5mm
Periphery = 11.6mm ~12mm
Angle = 25 degrees

Full wedge off the shelf max is 8.4mm at 15 degrees

Question 12

What’s the MAX augment thickness in 25mm and 35mm post length for Shoulder ID?

Answer 12

Center = 10mm
Periphery = 16.6mm ~17mm
Angle = 25 degrees

Full wedge off the shelf max is 8.4mm at 15 degrees

Question 13

What are benefits to using Shoulder ID?

Answer 13

• NO GLENOID REAMING/BONE PRESERVATION
• Patient MATCHED implant…(Matching the implant to the deformity…NOT the deformity to the implant by reaming away bone)
• Peripheral screw length optimization by first setting your screw location to get best bone purchase then compute your augment
• Superior for use in biplanar glenoid deformities (Retroverted and Superior Inclinated) without all the reaming/medialization

Question 14

What’s current lead time to get a Shoulder ID implant?

Answer 14

6 weeks
4 weeks on LUR

Question 15

Why use a +3mm offset post option?

Answer 15

Allows for dictating baseplate position into best quality bone

Question 16

What’s minimum post engagement required into glenoid vault?

Answer 16

10mm

Question 17

Do you want post to be “contained” within the vault or perforate?

Answer 17

Contained within the vault…IF on rare occasion there’s perforation it needs to be anteriorly.

Question 18

What patient population would Shoulder ID be ideal for?

Answer 18

• Patients with a small glenoid vault due to smaller boss on this implant in comparison with normal boss of off shelf solution.
• All primaries