UTB1 Plans, Specs & Color coding

Question 1

What plans furnish essential data, such as land contours, roads, utilities, trees, structures, site preparation and development, and significant physical features, on or near the construction site? (Page 1-1)

Answer 1

Civil/Site

Question 2

What plans show the support of the building or structure, including walls, columns, beams, foundation, roof, and deck slab? (Page 1-1)

Answer 2

Structural

Question 3

What plans contain the electrical distribution system plans, interior wiring drawings, and electrical component schedules for a building, or structure? (Page 1-1)

Answer 3

Electrical

Question 4

What plans include layouts and details for systems of plumbing, heating, ventilating, air conditioning, and refrigeration? (Page 1-1)

Answer 4

Mechanical

Question 5

The purpose of what type of drawing is to show a three- dimensional picture in one drawing? (Page 1-4)

Answer 5

Isometric

Question 6

What is the process of determining requirements and devising and developing methods and schemes of action for construction of a project? (Page 1-15)

Answer 6

Planning

Question 7

Ensure all electrical power tools are protected by what before use? (Page 1-17)

Answer 7

GFI

Question 8

What provide for marking physical hazards, for indicating the location of safety equipment, and for identifying fire and other protective equipment? (Page 1-18)

Answer 8

Color warnings

Question 9

How many classes of materials have been selected to represent the general hazards for all dangerous materials? (Page 1-18)

Answer 9

Five

Question 10

(True or False) Utilitiesmen use different types of plans and drawings. These plans and drawings are developed by immediate supervisors, architects, and engineers.

Answer 10

True

Question 11

Which of the following plans illustrates both existing and finished contours, an essential data for grader operations?

Answer 11

Site

Question 12

Which of the following plans show the location of existing wastewater and gas
piping systems?

Answer 12

Civil

Question 13

Location of proposed entry points for water and gas lines can be found on which of the following plans?

Answer 13

Foundation

Question 14

As a UT, you need to be aware of the locations of interior walls and fixtures. Which of the following plans will provide this information?

Answer 14

Floor Plan

Question 15

Which set of plans is useful in helping you in determining the amount of pipe necessary for vertical piping systems?

Answer 15

Elevation plan

Question 16

Electrical plan information and layout are usually superimposed on which of the following plans if any?

Answer 16

Plot/ Building plan

Question 17

(True or False) The interior electrical layout for a small building is usually drawn into a print of the floor plan.

Answer 17

True

Question 18

The electrical wiring diagram is superimposed over what type of plan?

Answer 18

Floor plan

Question 19

Through which type of water line does water enter the structure from the main distribution line?

Answer 19

Cold water service line

Question 20

Which of the following fittings extends from the P-trap of a fixture to a junction with any other drainage fixture?

Answer 20

fixture drain

Question 21

What is used to connect horizontal drainage to the stack?

Answer 21

fixture branch

Question 22

Which of the following fittings feeds into a vertical pipe?

Answer 22

Soil and waste fixture branch

Question 23

Which of the following fittings will include human waste?

Answer 23

Fixture branch

Question 24

Which of the following stacks carries waste but not human waste?

Answer 24

Waste stack

Question 25

Which fixture usually located near heating and laundry areas is installed to receive floor water drainage?

Answer 25

Floor drain

Question 26

What piece of equipment extends from the building drain to the community sewer line?

Answer 26

Building drain

Question 27

The isometric drawing is a combination of which of the following plans?

Answer 27

Floor and elevation

Question 28

Horizontal lines in an orthographic elevation are projected at what angles in an isometric drawing?

Answer 28

30 and 60 degrees

Question 29

Blueprints are copies of what type of drawing?

Answer 29

mechanical or other types of technical drawings

Question 30

Which Mil Standard specifies the size, format, location, and type of information that should be included in military blueprints?

Answer 30

ASME Y14.24

Question 31

The title block of a military blueprint can be located where?

Answer 31

lower-right corner

Question 32

A space within the title block with a diagonal or slant line drawn across it indicates what to the reader?

Answer 32

Information not required

Question 33

A letter designation of “S” on an NAVFACENGCOM drawing indicates what type of information?

Answer 33

Structural

Question 34

Where does the drawing number appear on a set of blueprints?

Answer 34

lower right- hand comer of the title block

Question 35

Revision number is located where on a set of blueprints?

Answer 35

upper right-hand comer

Question 36

What is utilized to find a specific part on a blueprint?

Answer 36

Zone number

Question 37

Which part of the blueprint will provide the number of specific parts needed for job?

Answer 37

Bill of Materials

Question 38

Which of the following construction lines is a light and continuous along which the tracing is trimmed?

Answer 38

Trim line

Question 39

Which type of line is drawn outside the structure or detail to show distance?

Answer 39

Dimension line

Question 40

Which line is used in conjunction with the dimension line?

Answer 40

Extension line

Question 41

Which line contains wavy breaks at specified intervals?

Answer 41

Broken line

Question 42

Which line is made of alternating long and short dashes to indicate the center of an object?

Answer 42

Center line

Question 43

``` Which of the following is NOT considered a plumbing fixture? A. Sink B. Water closet C. Shower D. Gas trap ```

Answer 43

D. Gas trap

Question 44

``` Common water fittings include all of the below except which of the following? A. Elbow B. Bend C. Tees D. Unions ```

Answer 44

B. Bend

Question 45

Which piece of equipment is utilized to make turns in a piping system?

Answer 45

Elbow

Question 46

Tees are used to achieve how much of a angle to be branched off a line?

Answer 46

90 degrees

Question 47

Unions are used in which type of piping systems?

Answer 47

Black iron/ galvanized

Question 48

What type of valve is commonly used to start and stop water flow?

Answer 48

Gate valve

Question 49

What type of valve is utilized to regulate the flow of gases by throttling?

Answer 49

Globe valve

Question 50

Which valve is used to shut off water to a single fixture?

Answer 50

Globe valve

Question 51

``` Which of the following is NOT part of common waste fittings? A. Bends B. Sanitary tees C. Combination wye D. 1/4 bend ```

Answer 51

D. 1/4 Bend

Question 52

Which waste fittings are used in vertical wastewater piping?

Answer 52

Combination Wyes

Question 53

What is the reason for the long sweeping branch in combination wye fittings?

Answer 53

Reduces obstructions

Question 54

Which joint is used with galvanized steel piping?

Answer 54

Screwed joints

Question 55

What are soldered joints manufactured of?

Answer 55

soft iron / copper???

Question 56

While reviewing a blueprint, you notice a line perpendicular to the piping with bars on either end. This indicates which type of joint to be used?

Answer 56

No hub coupling

Question 57

Two parallel lines of equal length on a blueprint indicate which of the following?

Answer 57

Mechanical Joint

Question 58

Mechanical joints are commonly used in which type of piping system?

Answer 58

Large cast iron water piping system

Question 59

What is the division number associated with mechanical aspects of a project on a set of specifications?

Answer 59

Division 15

Question 60

What type of piping material is used when dealing with a sanitary sewer, below ground installation?

Answer 60

Extra Heavy Cast Iron

Question 61

In a sanitary sewer, above ground system, the sanitary sewer vent will extend full size through the roof for a distance of not less than how many inches?

Answer 61

12 inches

Question 62

Water piping buried in the ground will be manufactured out of what type of material?

Answer 62

Type L hard copper with soldered joints

Question 63

Vertical lines used in the installation of water piping aboveground will be manufactured out of what type of material?

Answer 63

Type L soft copper

Question 64

Which type of connections are not permitted below the finished floor?

Answer 64

Slip - Joint

Question 65

How many classes are associated with general hazards?

Answer 65

Five

Question 66

What color does yellow represent with respect to general hazards categories?

Answer 66

Flammable

Question 67

Anesthetics and harmful materials is depicted by what color?

Answer 67

Blue

Question 68

All materials which readily furnish oxygen for combustion is identified by which color?

Answer 68

Green

Question 69

Gray represents which of the following classes of material?

Answer 69

PHYSICALLY DANGEROUS MATERIALS.

Question 70

When using shatterproof cylinders how big and what color should the stenciling be?

Answer 70

Letters must be black or white and approximately 1 inch in size.

Question 71

What color should the cylinder be that contains chlorine gas?

Answer 71

Brown

Question 72

Supply has just dropped off a yellow colored cylinder, which of the following gases is contained inside?

Answer 72

Acetylene

Question 73

What color is the cylinder containing oxygen?

Answer 73

Green

Question 74

Which of the following cylinders contains methyl chlorine?

Answer 74

Yellow, brown, and orange markings

Question 75

If a pipe is 10 inches in diameter, what size should the stencil lettering be?

Answer 75

3 inches

Question 76

If a pipe is under 1-1/2 inch in diameter, what size should the stencil lettering be?

Answer 76

1/2"

Question 77

An isometric drawing is designed to show what type of picture?

Answer 77

Three dimensional

Question 78

Which plan shows the proposed entry points for water and gas lines?

Answer 78

Foundation