3M- Workcenter Supervisor - QB2

Question 1

What does 3M stand for?

Answer 1

• Maintenance and Material Management

Question 2

What is the HMUG?

Answer 2

Hazardous Materials Users Guide

Question 3

As a qualified maintenance person, what do you do upon completion of preventive maintenance?

Answer 3

• inform the WCS of completion or issues
• Sign the accountability log if completed.

Question 4

What rank must a WCS have?

Answer 4

Must be an E-6 or above unless waived in writing by the XO

Question 5

Who is responsible for ensuring 3M documents generated within the division are complete, accurate, promptly prepared, and submitted?

Answer 5

• Division Officer

Question 6

In the Space Manual, there is a page with a series of numbers like: 5000/005-A7. What is this page called and what are the series of numbers called?

Answer 6

• LOEP
• SYSCOM MIP Control Number

Question 7

What is a SPLIT MIP?

Answer 7

• A MIP that is SPLIT between two or more work centers due to sharing the same piece of equipment or system

Question 8

Split MIPS are approved by whom?

Answer 8

XO

Question 9

Classified MRCs are printed on what color paper?

Answer 9

• Pink paper

Question 10

What are you looking for when verifying MIP to LOEP?

Answer 10

• Make sure the MIP SYSCOM Control Number on the MIP matches what’s on the LOEP

Question 11

How long is 0.1 man-hours?

Answer 11

• 6 minutes

Question 12

What does it mean if the SYSCOM Control Number at the bottom right of the MRC is shown with brackets [ ] around it?

Answer 12

Printed from PMS VIEWER tab and should not be used due to potential loss of custom line-outs

Question 13

What are the steps to applying ORM?

Answer 13

1. Identify hazards
2. Assess hazards
3. Make risk decisions
4. Implement controls
5. Supervise

Question 14

What is safety chapter B6

Answer 14

Respiratory Protection

Question 15

What are the types of tags used in the tag out system and what colors are they?

Answer 15

• DANGER- Red
• CAUTION- Yellow

Question 16

What type of tags prohibits the operation or removal of equipment that could jeopardize safety of personnel or endanger equipment?

Answer 16

• Danger Tags

Question 17

List the sections of the Tag out Log.

Answer 17

• Tag-out Index
• Record of Audits
• TORSs (active and cleared)
• Instrument Log

Question 18

What symbol indicates a Safety of Ship item?

Answer 18

*

Question 19

Which symbol following a periodicity code indicates that the procedure is intended to be scheduled and performed by either Ship’s Force or Off-Ship Maintenance Personnel?

Answer 19

++

Question 20

When Daily (D) and Situational checks (R) are not accomplished they become _____ checks?

Answer 20

Lost

Question 21

What is the non-calendar periodicity code SU?

Answer 21

Start-up

Question 22

What is Status I IEM?

Answer 22

• Equipment not scheduled for corrective maintenance or overhaul
• Equipment remain onboard
• Will be inactive during extended period of time

Question 23

What is the purpose of the Spot Checks?

Answer 23

• To validate that previously scheduled and accomplished MRCs were performed correctly

Question 24

What is the LCPO’s role in implementing force revision?

Answer 24

• Verify that all PMS changes have been properly applied to the WC schedule utilizing SKED Revision Editor
• Submit PMS schedule to the DIVO for review and concurrence

Question 25

What is a JSN?

Answer 25

- Job Sequence Number - a four-digit number assigned by the work center to the maintenance action