ATA 76 GE Flashcards
EEC gets position of thrust level from
a N1 indication
b TLA resolver
c Autothrottle servo
B*
TLA resolver gets excitation power from
a ELMS
b EEC
c Control alternator
B
On which page you can see indication of thrust resolver angle
a EPCS page 1
b EPCS page 2
c Secondary engine page
A
Which switch can be found on thrust lever
a Autothrottle arm switch
b Autothrottle disconnect switch
c Autopilot disconnect switch
B
Autothrottle servo is drived by
a EEC
b AIMS
c ELMS
A*
Where is located the relay that fuel control switch used to start and stop engine
a Engine relay unit
b EEC
c ELMS
C
When EEC is resetted
a Fuel control switch move from RUN to CUTOFF
b Fuel control switch move from CUTOFF to RUN
c Aircraft transition from air to ground
A
Which unit control autostart
a AIMS
b ELMS
c EEC
C
When the Reverse thrust lever is up, you can (B1)
a. move the forward thrust lever beyond IDLE position
b. not move the forward thrust lever beyond IDLE position
c. move the forward thrust lever to TAKEOFF position
B
The Autothrottle Servo Motor (ASM) brake let you (B1)
a. Disengage Autopilot
b. Disengage Autothrottle
c. Override ASM input
C
You can adjust the TLA resolvers by (B1)
a. The length of control rod which connects reverse thrust lever and ASM brake
b. The length of control rod which connects thrust lever and ASM brake
c. The length of control rod which connects ASM brake and Interlock actuator
B*
