Garmin G1000H Avionics Flashcards
On the PFD, what is indicated by a red ASI pointer with white digits?
Vne is being exceeded
What type of exceedance is not stored in the Exceedances page?
Rotor RPM
The PSI gives an indication based on one of which three parameter?
- Torque (Q)
- Measured Gas Temperature (MGT)
- Gas Generator RPM (NG)
Which parameter is referenced by the PSI needle?
The one that will reach MCP first under current conditions - known as the ‘controlling parameter’
What does the needle on the PSI represent?
The percentage of power being used in reference to the controlling parameter’s MCP limit
i.e. a PSI reading of 10 would indicate MCP regardless of the limiting parameter’s actual value
What does the coloured box around a PSI parameter indicate?
The controlling parameter
At what fuel weight will the Fuel Indicator turn yellow, and a Yellow LOW FUEL caution be displayed?
75 +/- 10 lbs
How are advisory captions displayed?
White or green text on a black background that flashes for 5 seconds and then is automatically acknowledged
How is engine and flight information displayed in reversionary mode?
All engine and flight information is displayed on the remaining page
How would reversionary mode be manually selected?
Place the ‘REV’ switch to select the remaining functional display. I.e. if the PFD has failed, select the ‘REV’ switch to ‘MFD’
What impact does “Split Com’ have on caution and warning alerts?
They cannot be heard in the LHS with ‘Split Com’ enabled
What impact does a GMA failure have on caution and warning alerts
They cannot be heard in the LHS during a GMA failure.
What is added to the display when the PSI enters the yellow arc?
A 5 minute countdown timer
What is the indications when the PSI 5 minute timer has 30 seconds left?
It flashes and the audio ‘ping ping’ sounds
What is the indications when the PSI 5 minute timer reaches zero?
It turns red and the timer remains at zero
