JET 01 Treating Equipment Flashcards Preview

SLB Training > JET 01 Treating Equipment > Flashcards

Flashcards in JET 01 Treating Equipment Deck (19)
Loading flashcards...
1

Can you put a suction hose on the discharge side of a centrifugal pump?

no

2

Hard hoses (4-in) may be used in the
discharge side under the following
circumstances.

Not allowed under any circumstances

3

What is Well Services iron tested to?

1.5 times the working pressure

4

What is the maximum pressure of a 4 in
discharge hose?

100 to 125 psi

5

What is the maximum pressure of a FMC
butterfly valve?

175 psi.

6

High-pressure treating equipment is
hooked up from a positive displacement
pump to pump into a wellhead or other
high-pressure systems?

TRUE

7

When not in use, hoses should be stored
in __________.

a. cool places
b. dark places
c. away from electrical equipment
d. away from direct sunlight

8

__________ is the nominal ID of 2-in
15,000 WP treating pipe.

1.875 in

9

In an 2-in FMC Chiksan, the number of
steel balls per race is __________.

24

10

An important use of the 1x2 plug valve is
__________.

bleed off valve on the treating line

11

How many seal segments are there on a
2-in plug valve.?

2

12

Safety Standard 23 requires that all 2-in
1502 wing nuts stamped __________ to
be removed from service.

test

13

Based on erosion studies on the Chiksan,
the wing on treating iron should face the
__________.

well

14

When changing elevation, use a
__________ Chiksan configuration.

3-way

15

When changing direction, use a
__________ Chiksan configuration.

2-way

16

All connections in the treating line should
be of the same ID as the treating lines.

TRUE

17

1x2 plug valves can be used in place of a
choke.

FALSE

18

Gray-lock connection is used on
__________ and __________

B. coiled Tubing
C. stimulation

19

Which of the following is not high pressure
treating equipment?

butterfly valve