MFD Flashcards
When power is first applied by the FMS power switch to the MFDs, allow _______min warm-up time for temperatures above 0C (32F) and _________ min warm-up at temperatures from -15C to 0C.
2; 5
Which knob or button allows you to move the primary course pointer?
CRS knob
Which knob will change the HSI display to the MAP ARC base display?
MODE knob
Which knob or button allows the operator to select the navigation data (GSP, TAS, TTG, ET) displayed in the lower-right corner of the HSI display?
DATA knob
The ADI/PFD button adds a _____degree compass HSI arc to the _____ display
200; ADI
The decision height annunciator is removed from the display when the aircraft is at least __________ above the decision height setting.
10 ft
If you are 1,200 ft AGL and descending, your radio altimeter will be incrementing in:
50-ft intervals
The radio altimeter reads ____foot increments between 2500 and 1000 feet, _____
foot increments between 1000 feet and 100 feet, and_____foot increments below 100 feet.
50; 10; 5
Which speed mode annunciator appears below the speed deviation scale when the speed is relative to AOA?
SPD
Which overlays are supported by the MAP ARC base display?
Terrain (TERR), Weather (WXR), TCAS
The decision height setting represents an AGL HAT or HAA that can be set between _________ feet
0 and 2,500
Which of the base displays can support all three overlays (TCAS, TERR, WXR)?
HSI ARC and MAP ARC
What are the visual indications that commanded pitch or roll is invalid?
A flight director (FD) flag appears and the command bars are removed from view
A “DCP” flag on the HSI indicates:
The MFD control panel has failed
The runway symbol starts to rise on the ADI when the radio altitude reaches _______.
200 ft
