Safety Violations (Test Format) Flashcards
(45 cards)
Major: Failure to maintain control of ___
Blasting Caps and/or demolitions
Major: Failure to wear ___ while working with an initiating set or down range
Eye protection
Major: Failure to wear eye protection while working with ___
An initiating set or down range
Major: Handing ___ after an initiating set has been tied in to line/ring main
Primed demolitions
Major: Handing primed demolitions after an initiating set has been tied in to ___
Line/ring main
Major: ___ a firing system after an initiating set has been tied in to line/ring main
Stepping/crossing over
Major: Crossing ___ over a buring nonelectric initiating set
MDI/Shock tube
Major: Initiating a firing system ___
Prior to be instructed by cadre
Major: Cutting a cap with an ____ or any other device
M2 crimping tool
Major: Crimping a blasting cap with ___ a pair of M2 crimpers; cutting explosives on a ___ i.e. concrete or metal
Anything other than
Sparking surface
Major: Forcing a blasting cap into ___
An unprepared priming hole
Major: Preparing a ___ with anything other than M2 crimpers
Priming hole
Major: Prepping an ___ while personnel are still on target/down range
Initiating set
Major: Prepping an initiating set while personnel are still ___
On target/down range
Major: Failure to ___ while conducting electrical firing system operations
Shunt wires
Major: Failure to shunt wires while conducting ___
Electrical firing system operations
Major: Failure to ___ while working with electric blasting caps
Ground yourself
Major: Failure to ground yourself while working with ___
Electric blasting caps
Major: Failure to properly test ___
Electric blasting caps
Major: Failure to ___ electric blasting caps
Properly test
Major: Failure to use ___ (with no demolitions inside) to cover electric blasting caps while performing continuity checks and/or arming
A sandbag or rucksack
Major: Failure to use a sandbag or rucksack (with no demolitions inside) to cover electric blasting caps while performing ___
Continuity checks and/or arming
Major: Failure to keep RAMS “F” switch in the ___ after programming
“Hole-Off” position
Major: ___ unknown items (UXO, shrapnel, etc)
Picking up or kicking
