Flight Plans

Question 1

How many ALTN Flight Plans can be loaded into CAAS at one time? (not stored on the card)

Answer 1

5

Question 2

How many alternate flight plans can be stored on a mission card?

Answer 2

10

Question 3

What does RNAV and RNP stand for?

Answer 3

Area Navigation

Required Navigation Performance

Question 4

How many FPPs can a flight plan contain?

Answer 4

239
200- Future FPPs
39- History FPPs

Question 5

What are the mission constraints that must be applied to an ACP in order to make it a FPP?

Answer 5

Airspeed
-or-
Time
-or-
Altitude

Question 6

How many DATA pages are available for each FPP?

Answer 6

3

Question 7

How many Mark Points are available?

Answer 7

15

Question 8

What does the attribute MSD represent if showing by a flight plan point?

Answer 8

The first leg of a missed approach procedure

Question 9

Name the four operations and procedures that are provided by the commercial flight management function in the CDU?

Answer 9

SIDs, STARs, holding patterns, visual and GPS approaches

Question 10

What are the maximum number of Mission pages that can be set up in the CDU?

Answer 10

6

Question 11

Which Flight Plan Management term is an ACP with specific mission requirements

Answer 11

Flight Plan Point (FPP)

Question 12

Weight and Moment Arm can be entered for which fuel tank

Answer 12

ERFS tanks only

Question 13

On the CDU PERF DEFAULTS page, toggling LS6 with a blank scratchpad changes the displayed ____ to the next field

Answer 13

Cargo Zone

Question 14

Values on PERF INIT pages are derived from where

Answer 14

the values entered on the PERF DEFAULTS page or mission card

Question 15

Once the aircraft is airborne, edits to the flight plan must be made through which page

Answer 15

PERF PROG or FPLN DATA pages

Question 16

What type(s) of flight plan(s) allow(s) the inbound course to be changed

Answer 16

Active and Modified Flight Plans

Question 17

How many data pages are available for each FPP

Answer 17

3

Question 18

How many ACPs can be selected on the TARGET ACPS LIST page

Answer 18

1

Question 19

Which MFD control layer provides access to the USER ACPS LIST page

Answer 19

SYS IDX

Question 20

entering a “ - “ and selecting a data field will pull the default value from either one
of which 2 pages

Answer 20

either PERF DEFAULTS or the Performance Database

Question 21

What does Lift-Off Reset allow the operator to do and when is this function available

Answer 21

to re-establish the start point for the current flight plan and is only available when the A/C is in a WOW condition

Question 22

What is mission fuel

Answer 22

the amount of fuel available to CAAS for mission planning

Question 23

What page do you go to in order to create a Hold pattern

Answer 23

FPLN MGMT → PROC/PATT → HOLD

Question 24

Window for P RAIM

Answer 24

± 15 minutes

Question 25

The Approach for Reference Only page is displayed only when

Answer 25

the selected approach is an ILS, Localizer only, Localizer/Backcourse, LDA, or SDF approach

Question 26

What CDU page lets me designate the fuel in the Extended Range Fuel System (ERFS) tanks as cargo?

Answer 26

Perf Prog

Question 27

What color is the TO FPP displayed on the active FPLN page

Answer 27

White

Question 28

What does the ATTRIBUTE “T” on the FPP line mean

Answer 28

FPP has a FIXED arrival time designated

Question 29

Which CDU page provides access to the MOVING ACP LIST page

Answer 29

PROC/PATT

Question 30

Does the active flight plan have to be named

Answer 30

No, unless you want to save it to your data card

Question 31

On the Active Flight Plan page (FPLN), what does typing L0.5 in the scratchpad and selecting LS1 direct the system to do?

Answer 31

Offsets the course to the left by 5 miles

Question 32

What does changing a flight plans point inbound course from 360º to C 330º tell CAAS to do

Answer 32

Change to overfly the point at that course

Question 33

Which CDU software partition contains SIDs, STARs, Holding Patterns, Visual and GPS approaches

Answer 33

Commercial FMF

Question 34

On PERF INIT 2/2, if you place a “U” in the OAT bracket at LS2 what have you told the system to do

Answer 34

use sensed data