Flight Director Flashcards
the active flight director partition is located in which MFD(s)
MFD 1 and 4
Where is the FD CPLR REL switch located
cyclic, or canted console
Where is the GO AROUND switch located
bottom of TCL
The Go Around function provides guidance cues to achieve a _____ fpm climb, current heading, and ______ knots airspeed
500 fpm
80 kts
The CH-47F Flight Director system provides the aircrew with guidance information for use in two operating modes. Name the two modes of operation for the Flight Director
Command and Coupled
Will the GO AROUND switch work with the DAFCS Selector Switch in the off position
yes
Identify the difference between a FD arm annunciator and captured annunciator
Arm annunciator: white
Captured annunciator: green
Which CDU page must be accessed to set the Track Select reference setting
FD Select
On which CDU page is ILS Decision Height entered
VOR/ILS Control page
What altitude (BARO ALT or RAD ALT) is captured when the THOV mode is activated solely by pressing the MFD bezel key on the MFD Flight Director page
RAD ALT
What are Flight Director Vertical Modes
BARO ALT
GPS ALT (GPS Altitude Hold)
RALT
VSPD (Vertical Speed Select)
What heading or track is captured when the pilot selects the HDG or TRK function key from the FD control layer on the MFD
the current heading or track
What are the Flight Director Approach Modes
VOR, ILS, ILS BACK COURSE (BC) TCN, TACAN POINT-TO-POINT (TCNP)
On the MFD Flight Director page the actual groundspeed displays with a white box around it and the reference groundspeed displays in which color
magenta
Which MFD control layer must be selected to allow selection of Vertical Speed Hold
FD, R3
