Brainscape's Knowledge GenomeTM

Browse over 1 million classes created by top students, professors, publishers, and experts.


See full index

BDS3 1 > Patient Safety > Flashcards

Patient Safety Flashcards

1
Q

define sterile.

A

The theoretical probability of there being viable micro-organisms present is < or equal to 1 x10-6

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

define operator.

A

Person with authority to operate a steriliser/washer disinfector

This includes those involved in noting of device reading and housekeeping duties

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

what guidance do we use for the decontamination process?

A

SHTM 2010 & 2030

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

List the stages the washer disinfector goes through. (5)

A

Flush/prewash - saturates the contaminated instruments

Main wash - Detergents are used at this stage to increase the effectiveness

Rinse - removes residue

Removing prions/vCDJ:
Thermal disinfection - actively killing microorganisms with heated water

Drying - removes moisture before sterilisation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

what temperature is the flush/prewash stage of the washer disinfector? - why?

A

< 35 degrees (to prevent coagulation of proteins)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

what temperature is the main wash stage of the washer disinfector?

A

Depends on the chemicals used (generally 45-65 degrees)

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

what temperature is the rinse stage of the washer disinfector?

A

< 65 degrees

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

what temperature is the thermal disinfection stage of the washer disinfector and for how long?

A

Between 90 - 95 degrees for a minimum of 1 minute

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

what temperature is the drying stage of the washer disinfector?

A

No specific temperature but its usually between 90 - 110 degrees

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

list the order of decontamination.

A

HAND HYGIENE

DONN PPE

CHECKS

AWD

REMOVE AND REAPPLY PPE

remove moisture and INSPECTION

MANUAL WASHING 
AWD 
ULTRASONIC ???
RINSE
STERILISATION
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

What areas should you inspect using the illuminated magnifier?

A

Check the hinge

Check the inside of the jaws of the instrument

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

after inspection of the instruments what do we use if they require further decontamination?

A

manual cleaning and then reprocessed in the AWD.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

what happens to the instruments after the use of the AWD, inspection and manual cleaning?

A

reprocessed in the AWD

sterilise

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

how do we determine how to clean each instrument?

A

the spaulding classifications

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

according to the spaulding classifications, define critical instruments.
How are these decontaminated?

A

Devices that enter tissues i.e. PDL that are usually sterile or enter the vascular system

these require to be sterilised

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

according to the spaulding classifications, define semi-critical instruments and name how they are decontaminated.

A

Instruments which must have contact with an intact mucous membrane but does not penetrate sterile tissues

these require to be sterilised

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

according to the spaulding classifications, define non-critical instruments and name how they are decontaminated.

A

Instruments have contact with intact skin only

disinfected and cleaned

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

why do we need sterile instruments? (4)

A

Reduces probability of infection transmission

There is an international standard for surgical instruments

Legislative and professional standards i.e. GDC standards

In order to maintain a high quality of care for out patients

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

what are the properties of a transport container? (4)

A

Rigid, durable and leak proof

Tight fitting lid

Be easily cleaned and disinfected.

Be easily distinguishable

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

what are the 4 key elements to successful cleaning?

A

time

temperature

chemicals

energy

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

what temperatures prevent protein coagulation?

A

< 35 degrees.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

what chemicals are used in the ultrasonic?

A

enzymatic detergents

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

what chemicals are used in the manual washing stage?

A

pH neural detergents

24
Q

describe the energy used in AWD’s.

A

high pressure jet sprays

25
Q

describe the energy used in the ultrasonic.

A

cavitation via sound waves

26
Q

what kind of water has to be used in sterilisers?

A

water of less than 30us (micro-siemens)- pure water.

27
Q

define conductivity.

A

Conductivity is a measure of all the particulate water has come into contact

particulates = silicates, organics, minerals and metals.

28
Q

Describe the relationship between pure water and particulate.

A

no particulate in pure water

29
Q

Why is the AWD used first instead of manual washing? (2)

A

The fresh water for each stage of the WD cycle ensures that contamination is removed from the instrument surfaces and the machine entirely.

WD makes the instruments safe for staff to handle and inspect and makes them safe to be sterilised.

30
Q

Why is the manual washing NOT done first (before AWD)? (4)

A

there is a Risk of aerosol production (if manual washing isn’t done below the water level)

Risk of contaminating the surrounding environment (if manual washing isn’t done below the water level)

Potential for inconsistency due to human error

SHARPS risk

31
Q

how much detergent is usually used in manual cleaning?

A

5ml per 1 litre of water

32
Q

describe the bushes used in manual cleaning.

A

long handled, soft bristled, non-metallic brush which can be processed through a thermal washing cycle.

33
Q

why do we scrub instruments below the water in manual cleaning? (3)

A

Increases the contact of the instrument and the detergent in the water

It minimises splashing - contaminating the enviro

Prevents aerosols being produced

34
Q

describe how the ultrasonic works.

A

Cavitation

Uses sound waves at a high frequency to generate microbubbles.

The fluctuation in pressures generated by the waves causes the bubbles to expand and then collapse which has a scouring effect against the surface of the instruments.

35
Q

what temperature is the ultrasonic?

A

24 degrees C

36
Q

how long does the ultrasonic run for?

A

20 minutes

37
Q

what must be recorded in the ultrasonics log book? (5)

A 
The date 
The cycle number 
If detergent was added 
What the temperature is 
The time its ran for
38
Q

what are the advantages of using steam to sterilise? (5)

A

carries large amounts of energy

Small amounts of water generate large amounts of steam

Is non-toxic

It can be recondensed and reused

There are no waste products

39
Q

list the 3 types of sterilisers used in dentistry.

A

Type N

Type B

Type S - less commonly seen as it is specialised.

40
Q

what temperature and how long does a Type N steriliser work for?

A

Works @ 134-137 degrees

maintained for 3 minutes

41
Q

describe how a type N steriliser works.

A

Work by filling the chamber with steam and passively forcing air out of the chamber. (No vacuum)

42
Q

what are the disadvantages of a Type N steriliser? (3)

A

Pockets of air can form within the chamber - this is unfavourable as these pockets offer do not sterilise the instruments

Because this steriliser cannot process wrapped instruments there is a danger of recontamination before the instruments can be used.

X - Cannot process wrapped, channelled or lumened instruments or hinged (due to the lack of vacuum capabilities)

43
Q

what instruments can a type N steriliser not sterilise?

A

Cannot process wrapped, channelled or lumened instruments or hinged (due to the lack of vacuum capabilities)

44
Q

describe how a type B steriliser works.

A

Pre-vacuum - Remove air by vacuum pump to create a negative pressure

Then chamber fills with steam - allows all surfaces of the instruments to be sterilised (even wrapped instruments)

Post-vacuum - removes remaining moisture to ensure the product is not saturated

45
Q

what temperature and how long does a Type B steriliser work for?

A

Works @ 134-137 degrees and must be maintained for 3 minutes

46
Q

what are the advantages of using a type B steriliser? (3)

A

Processes wrapped, channeled and lumened instruments

Since it can process wrapped instruments the instruments will be sterile at the time of use and can be stored for long periods of time.

can Process porous items i.e. cotton wool swabs

47
Q

how do we know if wrapped instruments have been sterilised at the correct temperatures.

A

have a chemical indicator

48
Q

what checks should be carried out for Type N sterilisers? (4)

A

Ensure the door seal is intact - no damage or debris

Check the Load carrier is not damage or has no debris/parts of instruments on it

Check there is no debris/instruments in the chamber itself

Ensure there is a sufficient amount of water within the reservoir

49
Q

what checks should be carried out for type B? (6)

A

Ensure the door seal is intact - no damage or debris

Check the Load carrier is not damage or has no debris/parts of instruments on it

Check there is no debris/instruments in the chamber itself

Ensure there is a sufficient amount of water within the reservoir

carry out a “Bowie-Dick” or “steam penetration” test

carry out a vacuum test and an air detector function test.

50
Q

what does a “Bowie-Dick” or “steam penetration” test ensure? (2)

A

ensures that;

  • the correct temperatures have been achieved
  • that sufficient air removal has occurred.

Anything less than 100% colour change is a fail

51
Q

how do we load sterilisers & the AWD? (4)

A

No overlapping or shadowing instruments

Hinge jointed instruments should be open at the hinge - so they don’t close during the cycle.

Don’t overload

Disassemble assemblies

52
Q

what checks do we carry out for the AWD? (5)

A

Spray arms rotate freely and without obstruction and none of the jets are blocked - spin it to test (both upper and lower)

Load carrier is not damage or has no debris/parts of instruments on it

The strainers and filters at the bottom are clear

The door seal is in tact and nothing preventing it from sealing

Ensure there is enough chemical within the reservoir in the machine

53
Q

what PPE do we require for manual cleaning and why? (3)

A

Apron/gown - protect clothing from becoming contaminated by the splashing

nitrile gloves and heavy duty rubber gloves = used to prevent SHARPS injuries

face shield = protect eyes and mouth (mucous membrane) from the contamination from splashing

54
Q

when do we Degas the ultrasonic? (1)

A

after every water change

55
Q

why do we Degas the ultrasonic? (1)

A

To remove oxygen which inhibits cavitation = instruments are not fully decontaminated

BDS3 1 (75 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2024 Bold Learning Solutions. Terms and Conditions