Stage 2 Communications Flashcards
What are the subsystems included in COMM?
1) VHF/HF Transceivers 2) RMP 3) ACP 4) Audio Management System 5) CIDS 6) CVR
What is the role of the RMP?
1) Control VHF/HF radio systems 2) Backup to FMGC RNAV
Which RMP works in EEC?
Only RMP 1
What is the difference between RMP on G9-ABM and rest of the fleet?
ABM does not have “LOAD” function
Will the selected frequencies and comm be lost using NAV pushbutton?
No
Can RMP3 control VHF 1 and 2 even if RMP 1 and 2 are off?
Yes
What can crew do in case one of the audio channels fail (ACP or AMU)?
use Audio Switching Selector for third channel
How long can ABY A320 CVR record?
2 hours
When is the CVR active?
1) On ground: First 5 mins with ELEC or while one engine runs until 5 minutes after shutdown. 2) In flight
Where is the CVR located?
AFT section
What does the CVR system consist of?
1) remote microphone (behind OVD) 2) hot mike funtion 3) recorder 4) OVHD controls
When can the CVR be erased?
A/C on ground with PRK BRK ON
When does the CVR Test PB work?
When GND CTL On or 5 mins after electrics and PRK BRK On
Where does the MECH CALL trasmission come from?
Nose LDG gear bay
What should Flight Crew take care of in order to get DME auto tuned with ILS/MLS?
LS PB on FCU On