FMA Flashcards
At what speed on takeoff does THR REF change to HOLD?
65 kts, after which thrust can be modified
What does TOGA. Maintain in roll ?
Track on takeoff LNAV engages at 50’
In VNAV what thrust mode will you see?
THR REF
When using FL CH what is displayed in the thrust and pitch fields?When capturing an altitude?
THR /. / FLCH SPDSPD/. /ALT
Does hitting the AT disc switch turn off the AT?
It only arms it to be reactivated by:TOGASPD VNAV FLCH OR cycling the auto throttle arm switch
If you start your takeoff roll without FD, how can you bring them up?
Hit TOGA again after 80knots.This will also give you THR REF and TO full thrust.
What type of intercept does the AFDS need to capture the localizar?
120 degrees
Do you have to set the inbound heading when the localiser captures?
No, it auto changes to inbound course
When does the pre auto land test occur?When does runway alignment occur?When does flare start?When does idle engage?
1500 radalt500to 200RA60-40’ RA25’
When does the AT disc on landing?
Reverser deployment
When does VNAV ALT appear?
When the airplane levels at a MCP alt that is not part of the FMC profile
When does the go around function arm?Will the FD’s bias into view during a go around even if they were switched off during the appr?
GS engages ORFlaps extendedYes, they bias into view during the GA
What climb rate is given when you hit the TOGA?How can you increase it to full thrust?
2000 fpm Second click of TOGA
What is roll controlling during a go around?How is pitch selected in GO around?
Ground trackHigher of MCP speedOrSpeed at go around initiation.However if your speed is above these
In a go around when should you engage a lateral mode?Pitch mode?
400’ LNAV or HDG SEL1000’. VNAV or FLCHG
