FADEC control, how many levers does it have?
single lever only
Pressure =
Force / Surface Area
P= F/A
When the Aircraft changes into Normal law, Alternate law, Direct law, Mechanical law, what feature is lost?
Cabin air for large airplane is taken from:
The HP compressor
What should Air/fuel Ratio be burning?
Take off (T) - 10:1
Normal - 12:1
Lean - 16:1 or 17:1
economy - 14:1
function of CSD constant speed drive:
1- drive generator at constant speed
2- generator produces constant frequency
Battery Capacity Ah =
Current (A) x Time (h)
Resistance and Capacity.
Output
high Resistance - low Capacity-
NORM
low Resistance - low - Capacity
FAULT
low Resistance - high Capacity -
FIRE
I don’t care Ramon can dance
Impulse:
Pressure Drops
Pressure constant
Reaction:
Pressure constant
Pressure Drpos
AC =
series, provide max voltage
DC =
prallel, provide max power
Primary flight controls are considered:
Elevators
Ailerons
Rudder
Roll spoilers
Secondary flight controls are considered:
Flaps
Slats
Stabiliser
Speedbrakes
Trim tabs
FEATHER is selected ———–>
Condition level, Directly
To select RESERVE thrust ———–>
Power level, Directly
Shaft Power -
Expansion - velocity - mechanical work
Propelling -
Expansion - pressure - velocity
Fatigue =
Structural damage due to load cycles . [ Keyword , Load cycles ]
Steady tensile load =
stress corrosion
Deformed =
Strain
Stress =
Cycle load