FCR/RFI Flashcards
(24 cards)
T/F The RFI can detect and process pulse, pulse Doppler, and continuous wave (CW) radar signals.
TRUE
The GTM/RMAP FOV is: WFOV __________, MFOV __________, NFOV __________ and ZFOV __________.
W: 90 degrees, M: 45 degrees, N: 30 degrees, Z: 15 degrees
What are the four ways to change the NTS target?
Selecting NTS option, cursor select, RFHO, shooting the NTS
_______________________ improves STI detection and classification and Moving Target Indicator (MTI) classification.
Scan to Scan
Which Priority scheme would you use if you expected to engage moving targets?
Priority Scheme “C”
Which FCR priority scheme emphasizes only stationary ground targets?
Priority Scheme “B”
Where does the TSD page display detected RFI emitters?
Outside of the ASE footprint
What does a flashing (3 second) ANTS symbol indicate?
Out-prioritize NTS
Where does the TSD page display ASE threats?
Inside the ASE footprint
How is the number one RFI emitter displayed?
Home plate symbol around emitter
Friendly emitters are displayed in _______ and enemy emitters are displayed in ________.
Cyan blue ; yellow
The ___________ switch is used to rapidly position the FCR centerline to the line of bearing of an emitting threat as detected by the RFI.
Cued Search
Repeatedly pressing the cued search button will __________.
continue to orient the FCR centerline to the next priority emitter
Which terrain sensitivity setting is optimized for open fields and wooded areas with loose detection thresholds?
Clustered Trees
A cued search may be performed on a Fine Detect or Course Detect region of the RFI to?
90 degrees to the ADL
When receiving an RFHO, the aircraft must accept the RFHO within________.
6 min
If the Crew has not accepted the RFHO message within the allotted time, the crew will observe the Data Invalid message in the Weapon status inhibit section.
When the FCR detects a moving targets at distances between ______ and _____ the RF missile will always default to ______.
500 m and 8000 m ; LOBL (SH HMMS D-99)
Moving target symbols become stale after _________ and stationary become stale after __________.
5 sec ; 30 sec
How many RFI emitters can be tracked, and how many will be displayed?
40 tracked, 10 displayed
After RFI emitters have ceased radiating for __________ the symbols will change to partial intensity for __________.
30 sec ; 60 sec
A single scan burst in GTM narrow FOV will give _____ scans.
3 scans
What is the caution associated with use of the FCR TEMP ORIDE button?
“Continued use may cause damage to components”
The FCR will provide reliable data while maneuvering up to __________ in roll and ___________ to ___________ in pitch.
20 degree ; 20 degree ; -15 degree
When will shot-at symbols be displayed beneath target symbols?
During/after scan prior to HF launch
