FGIA General
flashcards
Decks in class (33)
# Cards
-
FenestrationMaster: 2.0 - Group 345
-
Group 4.A - Building Codes - Evolution Types and Requirements97
-
Group 4.B - Building Codes, Part II: Energy Efficiency and Thermal Performance56
-
Group 4.C - Skylights 1-3: Introduction to Skylights for Daylighting of Buildings68
-
Group 5.1 - Window and Door Installation, Part 1: Flashing48
-
Group 5.2 - Window and Door Installation: Sealants.47
-
Group 5.3 - Residential Window & Door Installation - Key Principles27
-
Group 5.4 Window and door installation, Part II : Industry Performance Standards47
-
Group 5.5 Commercial Window and Door Installation, Part 1: Overview39
-
Group 5.6 Commercial Window and Door Installation, Part 2: Installation Preparation55
-
Group 5.7 Field Testing, Part 1: Air Infiltration and Water Pentration Resistance43
-
Group 5.8, Field Testing Part II: Forensic Evaluation49
-
Group 5.9 - Anchorage, Part 1: Anchorage Analysis56
-
Group 5.J Anchorage, Part II: Substrates44
-
Group 6.A Aluminum Storefronts and Entrances, Part 1: Design Considerations52
-
Group 6.B, Aluminum Storefronts and Entrances, Part II: Entrance Types and Operating Hardware77
-
Group 6.C - Aluminum Storefronts and Entrances, Part III: Fundamental Design Factors and Specification Development60
-
Group 6.D - Curtain Wall Manual, Part 1: System Types and Design Considerations45
-
Group 6.E - Curtain Wall Manual, Part II: Importance of Tolerances and Clearances in Wall Construction22
-
Group 6.F - Curtain Wall Manual, Part III: Testing30
-
Group 6G - Curtain Wall Manual, Part IV: Responsibilities of the Architect Related to Installation19
-
Group 6F - Curtain Wall Manual, Part V: Contrators Responsibilities and Installation Qualifictions8
-
Group 6i - Energy and the Architectural Fenestration Industry, Part 1: Minimizing Energy Loss43
-
Group 6j - Energy and the Architectural Fenestration Industry, PART ii: The Future of High-Performance Fenestration35
-
Group 1A-E - Window Selection Guide - ALL0
-
Group 1 F-H - Glass, All0
-
Group 1 I-L - Specifying Windows, Doors, Skylights (NAFS-17) All30
-
Group 1 M-O - Special Performance Challenges, Part I-III0
-
Group 1 P-Q - Selection and Application Guide for Plastic Glazed Skylights and Sloped Glazing (PSSG-19) Part 1 & II3
-
Group 2A - Profile Material and Performance, Part 1: Wood and Aluminum0
-
Group 2B - Profile Material and Performance, Part II: Thermoplastic and Thermoset Profiles0
-
Group 2C - Finishing Touches, Part I: Coting and Finishes for Aluminum Fenestration Framing0
-
Group 2D - Finishing Touches, Part II: Cotings and Finishes for Thermoplastic and Thermoset Fenestration Framing0
