Hose testing

Question 1

Records of hose testing should be sent to who

Answer 1

Water supply coordinator

Question 2

During hose testing, Once the lines
are filled with water what should happen?

Answer 2

the outlets should be gated down to the minimum flow
needed to maintain line pressure.

Question 3

When are station officers notified of upcoming hose testing

Answer 3

may

Question 4

When does the hose coordinator compile hose records of testing

Answer 4

september

Question 5

What pressure should hose be filled with for hose testing

Answer 5

50-100psi

Question 6

Once the air is bled from the hose, what pressure should the hose be tested at

Answer 6

200psi for 5” hose for 5 minutes and 250psi for all other hose for 5 minutes

Question 7

What hose is not tested

Answer 7

wildland hose

Question 8

What should be done when pressure is achieved? For hose testing

Answer 8

gate back discharges to reduce water flow

Question 9

What should be recorded on service test results for tested OOS hose?

Answer 9

Identify coupling
leaks (Male or female coupling) on the “OOS” report along with the test date and
hose ID number. Mark leaks in the hose between the couplings with black
marker; tag hose with OOS tag. Tie an overhand knot in the section in need of
repair and store it at your station. Send the hose testing worksheet to the water
supply coordinator.
10. Include your Station #, size, color, and length of hose needing repaired or
replaced.