Indicating and Recording Flashcards
(24 cards)
What color are warning messages?
Red
When warning messages are displayed, they are accompanied by:
- Flashing master warning
- Aural Alert
- Voice Advisory if applicable
What color are Caution messages?
AMBER(YELLOW)
Caution messages will appear immediately below what?
Warning Messages
When caution messages are displayed, they will be accompanied by:
A flashing master caution light
Warning and caution messages will normally appear on the:
Primary EICAS display
What color are advisory messages?
Green
Which messages are always displayed on the very top of the status page?
Advisory
What color are status messages?
White
There are how many types of aural warnings provided to alert the crew?
10
Which Warnings cannot be silenced by pushing the MASTER WARNING push button?
- Stall warbler
- Stabilizer trim clacker
- Gear horn
- GPWS/TCAS voice or aural alerts
- Overspeed clacker
- Flap clacker
- AP disconnect cavalry charge
- Takeoff Configuration warnings
Data Concentrator Units(DCU’s) do what task?
Process and transmit aircraft sensor data to the Flight Data Recorder(FDR) and EICAS lamp driver unit
How do you box CAUTION and STATUS messages?
Pressing the CAS button will box Caution Messages, pressing the STAT button will box Status Messages
With just the battery master turned on, how long can the CRT’s be operated for?
5 minutes with no AC to power the cooling fans
What always accompanies a master caution switchlight?
A single chime
Are the GPWS and TCAS aural warnings disabled by selecting the AUDIO WARNING disable switches on the copilots side panel?
No
Which four buttons on the EICAS control panel(ECP) will still operate if the ECP microprocessor fails?
- PRI
- CAS
- STAT
- STEP
What indications can be displayed on the N1 gauges?
- APR
- REV
- Thrust Setting
During flight when will the landing gear and flap position display be removed?
When all of the following are met:
- The wheel brake temperatures are in the normal range
- Landing gear is up and locked
- Flaps are up
The gear and flap position indication will be displayed again when either is selected
During flight when will the brake temperature indicators be removed from display on ED2?
When all three of the following conditions are met:
- Landing gear is up and locked
- All brake temperatures are normal
- Flaps are up
What happens if ED1 fails?
The primary page is automatically transferred to ED2
During pushback and starting the engines, a white FDR FAIL status message appears. What would you do?
The beacon switch is probably not on
When will the APU RPM and EGT gauge be displayed?
The APU RPM and EGT gauge is displayed when the APU PWR FUEL switchlight is selected
How is the lamp light intensity set to bright or dim?
The IND LTS switch on the miscellaneous test panel sets lamp intensity
