1-10

Question 1

What is the minimum voltage for batteries 1 & 2?

Answer 1

22.5 V

Question 2

What is the procedure if battery voltage is less than 21.0?

Answer 2

-Report irregularity as outlined in FOM SP3100 Chapter 6
-Do not depart

Context: AC electrical power is established, safety and power up checklist is complete

Question 3

The E-PBIT is automatically performed when an initial AC source is introduced. What actions will interrupt the test?

Answer 3

-Hydraulic (any) pump running
-AC power supply interrupted
-Flight Control Mode Panel switches cycled

Question 4

If AC power is lost, what is the procedure for reestablishing AC power?

Answer 4

-Power down the airplane utilizing the Leaving the Airplane Checklist, then
-Power up utilizing the Safety and Power UP Checklist.

Question 5

BATT 1 OVERTEMP message populates on EICAS with an associated triple chime and Master Warning light, what do you do.

Answer 5

ASSOCIATED BATTERY - OFF

Question 6

What is the Min Hydraulic Reservoir Temp for ENG Start?

Answer 6

-18C

Question 7

What is the max fuel capacity?

Answer 7

20,935 lbs

Question 8

During fueling operations, a FUEL IMBALANCE caution message is presented on the EICAS, what is the max fuel imbalance?

Answer 8

794 lbs

Question 9

What is the max temperature for APU start?

Answer 9

ISA +35

Question 10

What time period must elapse after the EICAS is energized prior to starting the APU?

Answer 10

30 seconds