51-60

Question 1

What is the Stabilized Approach Criteria at 1500 feet HAT or the FAF, whichever comes first?

Answer 1

-Landing gear down
-FLAPS 3
-Airspeed not greater than 180 kts

Question 2

What is the Stabilized Approach Criteria at 1000 feet HAT for a straight-in-approach?

Answer 2

-On lateral and vertical profile
-Airspeed +15 and -5 of VAP
-Sink rate no greater than 1000 ft/min; briefing is required for a higher sink rate
-Aircraft fully configured for landing & BEFORE LANDING CHECKLIST complete

Question 3

What is the Stabilized Approach Criteria at 500 feet HAT for a straight-in-approach?

Answer 3

-Airspeed within the bug w/ adjustments for gust factor if required
-Thrust levers above idle

Question 4

What is the max landing weight?

Answer 4

74,957 lbs

Question 5

What is the minimum runway width for landing?

Answer 5

100 ft

Question 6

RCCs are reported as 3, what is the max crosswind component for landing?

Answer 6

15 kts

Question 7

Is it permissible to land with a FUEL IMBALANCE EICAS message and if so, under what conditions?

Answer 7

YES, less than 794 lbs

Question 8

What is required to move the thrust levers into the forward thrust range after using reverse thrust?

Answer 8

REV (amber or green)

Question 9

Does taxiing below the bridge in KSEA cause reason for concern with respect to the aircraft tail height? What is the aircraft tail height?

Answer 9

NO / 32 ft. 4 in.

Question 10

If landing below -40 degrees C, what is the crew required to accomplish prior to Flight View close-out?

Answer 10

maintenance inspection