31-40

Question 1

During takeoff the airplane pitches up un-commanded and a trim runaway is suspected, what is the memory item?

Answer 1

AP / TRIM DISC Button Press and Hold
PITCH TRIM SYS 1 & 2 CUTOUT Buttons Push IN

Question 2

Crews should not manually select CLB 1 unless?

Answer 2

-Operationally needed for safety of flight -Directed by departure procedure

Question 3

During climb, traffic preceding you reports moderate turbulence ahead at 7,000 feet, what speed would be appropriate to fly?

Answer 3

250 kts

Question 4

Describe a ROLL trim runaway, what is the memory item?

Answer 4

AP / TRIM Disc Button - PRESS and HOLD

Question 5

The roll axis is jammed, what is the memory item?

Answer 5

AILERON DISCONNECT HANDLE - PULL
(JAMMED CONTROL WHEEL - ROLL)

Question 6

What if the pitch axis were jammed?

Answer 6

ELEVATOR DISCONNECT HANDLE - PULL
(JAMMED CONTROL COLUMN - PITCH)

Question 7

What is the max altitude for APU bleed use?

Answer 7

15,000 ft

Question 8

What is the max operational altitude of the ERJ 175?

Answer 8

41,000 ft (SOPM CH 2)

Question 9

With an IDG OFF BUS EICAS message, the QRH says APU as required, if you choose to start the APU at cruise, what altitude do you have to be below?

Answer 9

30,000 ft

Question 10

The left PACK fails in cruise flight at FL 330, the issue is not resolved by the QRH procedure, what is the max altitude under this condition?

Answer 10

31,000 ft