COMNAVAIRFORINST 4790.2B (WITH CHANGE-1), THE NAVAL AVIATION MAINTENANCE PROGRAM (NAMP) Chapter 9

Question 1

Which system provides material in support of the operation and maintenance of aeronautical equipment?

Answer 1

Navy Supply System

Question 2

What is assigned by the Uniform Material Movement and Issue Priority System (UMMIPS) to all Navy
establishment activities for determining priorities for material support?

Answer 2

Force Activity Designator (FAD)

Question 3

Which instruction contains instructions for using the material priority system and for assigning Force Activity
Designators (FADs)?

Answer 3

OPNAVINST 4614.1

Question 4

How often at a minimum must meetings be held between Supply, O and I level maintenance representatives, and unit
Quality Assurance (QA) NAVDRP personnel to discuss Not Mission Capable Supply (NMCS), Partial Mission
Capable Supply (PMCS), Engineering Investigation (EI)/Product Quality Deficiency Report (PQDR) exhibits, and
other high priority related requirements?

Answer 4

Weekly

Question 5

How often at a minimum must meetings be held between Supply, O and I level maintenance representatives to
resolve problems, establish local procedures, and to promote material support effectiveness?

Answer 5

Monthly

Question 6

Which program was established at Navy Inventory Control Points (ICPs) to standardize previously existing programs
for intensive management of high cost, critical aviation and shipboard repairable items?

Answer 6

Intensive Repairable Item Management (IRIM)

Question 7

Which fund has the Department of Defense Comptroller approved Aviation Depot Level Repairable (AVDLR)
financing through?

Answer 7

Navy Working Capital Fund (NWCF)

Question 8

Which publication contains complete Advanced Traceability and Control (ATAC) procedures as well as exceptions
to the program?

Answer 8

NAVSUP P-485

Question 9

What will be used for shipping Engineering Investigation (EI) and Product Quality Deficiency Report (PQDR)
exhibits?

Answer 9

Joint Deficiency Reporting System (JDRS)

Question 10

The maintenance department must review Source, Maintenance, and Recoverability (SM&R) codes for accuracy
and adequacy using the standard Individual Component Repair List (ICRL) and request changes per which instruction?

Answer 10

NAVSUPINST 4423.29

Question 11

What is the highest tactical aviation command in the Fleet Marine Force (FMF)?

Answer 11

Marine Aircraft Wing (MAW)

Question 12

What is the smallest aviation unit designed for relatively independent operations with no outside assistance except
access to a source of supply?

Answer 12

Marine Aircraft Group (MAG)

Question 13

Which system can be used via message by afloat Supply Departments using shipboard communication facilities to
transmit requisitions?

Answer 13

Streamlined Automated Logistics Transmission System (SALTS)

Question 14

What is a procedure where all supply action documents in support of maintenance are entered and merged with the
material reporting history file for reporting to COMNAVAIRSYSCOM?

Answer 14

Material reporting

Question 15

What is used to identify each type of supply action document?

Answer 15

RECTYPE

Question 16

Where is weapon system costing accomplished?

Answer 16

Naval Supply Weapon Systems Support (NAVSUP WSS)

Question 17

What is the process of determining the range and quantity of items that are required to support and maintain an end
item of material for an initial period of service?

Answer 17

Provisioning

Question 18

Which codes are used to communicate maintenance and supply instructions?

Answer 18

Source, Maintenance, and Recoverability (SM&R)

Question 19

Which system is the authorized medium for directing and accomplishment and recording of modifications and one-
time inspections of equipment?

Answer 19

Technical Directive Status Accounting (TDSA)

Question 20

Which purpose codes will be used to identify an operating site’s fixed allowance material?

Answer 20

W and L

Question 21

How often are Naval Supply Weapon Systems Support (NAVSUP WSS) controlled material allowances adjusted
by Naval Supply Weapon Systems Support (NAVSUP WSS) for Transaction Item Report (TIR) activities?

Answer 21

Quarterly

Question 22

Preliminary allowance documents are initially provided to air station Supply departments by Naval Supply Weapon
Systems Support (NAVSUP WSS) as well as every how many years thereafter?

Answer 22

2

Question 23

Which instruction contains detailed Operational Support Inventory (OSI) and Shore Consolidated Allowance List
(SHORCAL) policy and procedures?

Answer 23

NAVICPINST 4441.16

Question 24

Every how many months at a minimum must Marine Aircraft Group (MAG) Aviation Consolidated Allowance
Lists (AVCALs) be reviewed and revised?

Answer 24

36

Question 25

Which instruction contains detailed Operational Support Inventory (OSI) and Aviation Consolidated Allowance List (AVCAL) policy and procedures?

Answer 25

NAVICPINST 4441.15

Question 26

Which instruction governs aeronautical material outfitting and supply support of the operating forces?

Answer 26

OPNAVINST 4441.12

Question 27

What were established and maintained to provide a retail outlet for non-technical supplies of an administrative and housekeeping nature?

Answer 27

SERVMARTs and MINIMARTs

Question 28

Which type of material are items having a unit of issued greater than the unit of application categorized as?

Answer 28

Indirect

Question 29

What is designed to provide users with the name, address, and socioeconomic data on all manufacturers and non- manufacturers doing business with the federal government?

Answer 29

H4/H8

Question 30

How many different types of organizations are addressed in H4/H8?

Answer 30

3

Question 31

Which publication establishes policies for the operation and management of afloat supply departments and shore- based units of the fleet operating forces under afloat procedures?

Answer 31

NAVSUP P-485 Volume I

Question 32

Which publication lists current publications, directives, and forms used throughout the Navy that have stock numbers assigned?

Answer 32

NAVICP P-2003

Question 33

Which instruction provides information to assist users in managing hazardous materials to minimize the risk involved in performance of various jobs?

Answer 33

DODINST 6050.05

Question 34

Which publication promulgates policy and procedures for the management of aircraft tires and tubes?

Answer 34

NAVAIR 04-10-506

Question 35

Which publication contains information related to, and procedures for, maintaining Operating Targets (OPTARs) and defines terms used in the resources management system pertaining to activities, ships, and squadrons?

Answer 35

NAVSO P-3013-1

Question 36

What are listings of the equipment and material that is required for performance of specific missions?

Answer 36

Table of Basic Allowances (TBAs)

Question 37

What specifies all maintenance significant repair parts associated with the equipment and is the basis for allowances?

Answer 37

Allowance Parts List (APL)

Question 38

How many different types of equipment lists are currently originated by Naval Supply Weapon Systems Support (NAVSUP WSS)?

Answer 38

3

Question 39

What lists repairable assemblies, supporting repair parts, attaching parts, loose equipment, and accessories used on various aircraft?

Answer 39

Weapons Equipment List (WEL)

Question 40

Which publication serves as a handy reference for personnel responsible for originating and processing MILSTRIP and MILSTRAP documents and contains those common definitions, coding structures, and abbreviated code definitions used on a day-to-day basis?

Answer 40

NAVSUP P-409

Question 41

What was designed to let Supply and Maintenance personnel identify and order replacement parts for the aircraft or equipment?

Answer 41

Illustrated Maintenance Parts List (IPB)

Question 42

Which manual is applicable to all Department of Defense (DOD) activities in the reporting, redistribution, and use of excess, surplus, and foreign excess personal property? (

Answer 42

DOD 4160.21-M

Question 43

Approximately how many line items stocked in General Services Administration (GSA) supply distribution facilities are listed in the General Services Administration (GSA) Federal Supply Catalog?

Answer 43

20,000

Question 44

Which publication is the official naval guide for correspondence preparation?

Answer 44

SECNAVINST 5216.5

Question 45

Which manual provides standard subject identification numbers for classifying correspondence, numbering instructions and notices, and assigning report symbols?

Answer 45

SECNAV M-5210.2

Question 46

Which office is the single point of contact for maintenance activities requiring direct supply support?

Answer 46

Aviation Support Division (ASD)

Question 47

How many sections is the Aviation Support Division (ASD) composed of? (

Answer 47

2

Question 48

How often is the Awaiting Parts (AWP) status report provided to the Intermediate Maintenance Activity (IMA)?

Answer 48

Daily

Question 49

What is a detailed statement of an I-level repair facility’s component repair capability?

Answer 49

Individual Component Repair List (ICRL)

Question 50

Which form must be prepared and submitted by air detachments to request material in support of helicopter maintenance from the host air capable ship?

Answer 50

DD 1348

Question 51

What serves as the point of contact for satisfying maintenance material requirements? (

Answer 51

Supply Response Section (SRS)

Question 52

How many units is the Supply Response Section (SRS) divided into?

Answer 52

5

Question 53

Which unit is under the functional control of the Supply Response Section (SRS) and is responsible for processing and expediting high priority requisitions?

Answer 53

Program Management Unit (PMU)

Question 54

What is responsible for ensuring research is performed on all requisitions received that fails initial system validation?

Answer 54

Technical Research Unit (TRU)

Question 55

Which Supply Response Section (SRS) unit is responsible for the pickup and delivery of all material to supported activities?

Answer 55

Material Delivery Unit (MDU)

Question 56

What shortens the issue and accounting procedures for recurring issues of maintenance related materials?

Answer 56

Pre-expended Bin Unit (PEB)

Question 57

The quantity of each item pre-expended will not exceed an estimated supply of how many days?

Answer 57

30

Question 58

Eligible items with a unit cost of what amount or under may be routinely established in pre-expended stocks?

Answer 58

$150

Question 59

How often at a minimum must stock records be reviewed to ensure all items have sufficient usage to be retained in a pre-expended status and to correct any mixing of pre-expended items?

Answer 59

Quarterly

Question 60

``` Which section is responsible for repairables management by accounting for repairables stored in Local Repair Cycle Asset (LRCA) storage areas, in the Intermediate Maintenance Activity (IMA) repair cycle, and those being processed for shipment to Designated Rework Points (DRPs)? ```

Answer 60

Component Control Section (CCS)

Question 61

How many units is the Component Control Section (CCS) divided into?

Answer 61

4

Question 62

Which Component Control Section (CCS) unit is responsible for maintaining control of repairable components in all phases of the repair cycle?

Answer 62

Document Control Unit (DCU)

Question 63

What is responsible for the receipt, storage, issue, and accountability of repairable assets under the control of the Aviation Support Division (ASD)?

Answer 63

Local Repair Cycle Asset Storage Unit (LRCA)

Question 64

Which publication contains procedures for retrograding Beyond Capability of Maintenance (BCM) repairables received from the Intermediate Maintenance Activity (IMA)?

Answer 64

NAVSUP P-485

Question 65

The foam in place packaging technique surrounds the repairable in a container with a bed of semi-rigid foam that is applied as a liquid that expands how many times?

Answer 65

200

Question 66

Which form must be used to document the removal of a suspected defective component from a ship or surface craft scheduled for repair at a designated Intermediate Maintenance Activity (IMA)?

Answer 66

OPNAV 4790/2K

Question 67

Which system is the authorized means for directing accomplishment and documentation of modification or one- time inspections of equipment procured by COMNAVAIRSYSCOM?

Answer 67

Technical Directive (TD)

Question 68

What is the Technical Directive (TD) Kit Shipment Report form number?

Answer 68

NAVAIR 13053/1

Question 69

Which type of components represent the most significant dollar investment in the entire aeronautical item inventory?

Answer 69

Repairable

Question 70

Which revolving fund funded by Congress finances the purchase and maintenance of stocks of common supply items required for support and operation of the Navy (expense type items)?

Answer 70

Navy Working Capital Fund (NWCF)

Question 71

What is the primary Inventory Control Point (ICP) responsible for material support of the Naval Aviation Program with respect to technical aviation material?

Answer 71

Naval Supply Weapon Systems Support (NAVSUP WSS)

Question 72

What are Fleet Readiness Centers (FRCs) not authorized to stock in the Navy Industrial Fund (NIF) retail store inventories?

Answer 72

Aviation Depot Level Repairables (AVDLRs)

Question 73

Which type of items are those ordered for as specific customer job order and in the quantities required for scheduled work based on a bill of material?

Answer 73

Direct Material Inventory (DMI)

Question 74

Which automated data processing and information system was designed to enable Fleet Readiness Center (FRC) material managers to control the flow of material to appropriate store rooms?

Answer 74

NAVAIR Industrial Material Management System (NIMMS)

Question 75

Which program is used to permit all government furnished material requirements of each commercial contractor to be properly processed by the government Supply System through a single Supply activity regardless of which Department of Defense (DOD) Supply activity is assigned inventory control responsibility?

Answer 75

Single Supply Support Control Point (SSSCP)

Question 76

For cost effectiveness, rework contracts are developed to provide services in yearly increments of up to how many years?

Answer 76

5

Question 77

Which program reviews all Integrated Logistics Support (ILS) elements to determine affordable overall support solutions?

Answer 77

BOSS III

Question 78

Logistics Engineering Change Proposals (LECPs) are funded by the Navy Working Capital Fund (NWCF) if the Return on Investment (ROI) is two to one over how many years?

Answer 78

10