Robots3 Flashcards
When using equipment what to wear
Safety glasses
soldering iron
Dont touch the tip of a soldering iron and keep them in their stand when not in use. Dont solder a circuit with power applied and Use a heat sink when soldering temperature sensitive stuff
Cut wire leads so that
Cut wires so that clippings fall on the table and do not pinch them
How many screws to replace
All of them
Hpw to solder a multi pin component
Avoid excess heating to any one area and dont go from pin to pin in a straight line
How long to apply heat from a soldering pencil
Couple of seconds
When to solder a circuit with power applied
Never
What to make sure about test instruments
They’re set for proper function and range
What to remember when cutting with an X acto knofe
Avoid cutting towards yourself
Safety thing to do when assembly of circuits
Observe polarity
Why should the intensity of an oscilloscope be as low as possible
To not burn out the screen