Install ICI burners

Question 1

When mounting the burner what is important to make sure

Answer 1

a good seal between the burner and the combustion chamber

Question 2

To prevent air leakage what must you for the burner

Answer 2

you will need to hand tighten the bolts and then check that burner is seated evenly all around the flange, ensuring there are no gaps, then tighten all nuts firmly.
Retighten all bolts after first firing and regularly after commissioning.

Question 3

How to mount the burner

Answer 3

In most cases the burner flange mounting system should be enough to support the burner. In some cases burner and pipe manifold support may be required to support weight of the burner and connected pipe train components.

Question 4

Burner block and casting failure is frequently the result of what

Answer 4

external stresses and strains transmitted to the burner through the piping

Question 5

How to stop external stresses and strains transmitted to the burner through the piping

Answer 5

Flexible connections

Question 6

Maxon RAMFIRE, it is required to tightly seal around the block and frame sub-assembly using what

Answer 6

fiber blanket

Question 7

In a refractory wall (sketch 1), basic burner may be used with what rammed into the space around burner

Answer 7

castable refractory

Question 8

The burner block should be coated with a what for good adhesion between it and the castable refractory material

Answer 8

mortar and The remaining gap should be packed with ceramic fiber insulation.

Question 9

In a soft wall (sketch 2), burner should be specified with optional burner block sleeve and wrapped tightly in what.

Answer 9

fiber blanket and the Remaining space should be packed with ceramic fiber insulation

Question 10

For maximum burner life, burner frame and furnace shell must be protected from hot gas flows what should be used

Answer 10

Use high temperature gasketing between burner mounting flange and furnace shell.