***TB SCBA Add 1 FAST PAK

Question 0

The fitting between the Hansen Fitting and the Low/High Pressure assembly is called the?

Answer 0

Schrader Fitting

C

Question 1

The fitting on the LP hose before the regulator is called?

Answer 1

Hansen Fitting

B

Question 2

The Low Pressure hose is___feet long.

Answer 2

20 feet long

D

Question 3

The high pressure hose is how long?

Answer 3

5 feet long

F

Question 4

At the end of the HP hose is__?

Answer 4

UAC Universal Air Connection Coupling

g

Question 5

The FAST PAK is carried by all___,___&___.

Answer 5

All Ladder Companies, Squads and Rescues

1.1

Question 6

If replacement Fast Pak decals are needed what shall be done?

Answer 6

RT-2 faxed to MSU.

1.2

Question 7

Is the regulator the same on position SCBA’s?

Answer 7

NO
Position SCBA’s are CBRN protected. FAST PAK is a “Non CBRN”
2

Question 8

T/F

The FAST PAK is NOT equipped with a vibralert or heads-up display indicator.

Answer 8

TRUE

4.1

Question 9

T/F

The only way to monitor the air pressure in the FAST PAK is the cylinder gauge.

Answer 9

TRUE

4.1

Question 10

T/F
It is essential that one member of the FAST unit is assigned to monitor the actual volume of air remaining in the portable cylinder..

Answer 10

TRUE

4.1

Question 11

T/F

The UAC is for emergency use only when a member is low or out of air within an IDLH atmosphere.

Answer 11

TRUE

5.2

Question 12

The ___foot HP hose will administer air to a members SCBA via the UAC. This will equalize air in both cylinders in approximately___seconds.

Answer 12

5 foot HP Hose.
approximately 60 seconds.
5.3

Question 13

T/F

The FAST PAK has a built in check valve hat only permits air to be delivered to a members SCBA.

Answer 13

TRUE

5.3

Question 14

T/F
If at anytime during the filling process a leak is detected, immediately discontinue the filling procedure and supply via one of he LP methods.

Answer 14

TRUE

5.4.6

Question 15

T/F If the dust cap on the UAC of the member’s SCBA is missing, quickly examine and remove any visible debris before connecting into the UAC. If the UAC is impacted or blocked with debris, use one of the LP methods.

Answer 15

TRUE

5.4.6

Question 16

T?F

In order for the UAC to work BOTH cylinders must have the cylinder valves FULLY OPENED?

Answer 16

TRUE

5. 4.1
6. 4.3

Question 17

What member is responsible for protecting the LP hose from high heat, hot embers, sharp objects and entanglement?

Answer 17

The member assigned to monitor thee air supply.

6.3

Question 18

T/F

Use of the Schrader Fitting is reserved for the use of SOC units only

Answer 18

TRUE

6.4 4

Question 19

T/F
The FAST PAK can be used to provide an air supply to non FDNY members when they are trapped in a IDLH atmosphere or confined space.

Answer 19

TRUE

7.1

Question 20

Can any FAST PAK be used for non FDNY members?

Answer 20

NO The FAST PAK assigned to the FAST Unit shall not be deployed for this operation. Additional Fast Paks shall be deployed if needed and victims should be removed from the IDLH ASAP. 7.1

Question 21

When is the FAST PAK inspected?

Answer 21

At the beginning of each tour and after each use.

9.10

Question 22

If placing the FAST PAK OOS who do you notify?

Answer 22

Notify the Battalion and request the Battalion Spare Fast Pak as a replacement.
9.12.2

Question 23

T/F
When FAST PAK use is anticipated, it should be turned on in a clean atmosphere and cylinder pressure gauge checked for FULL indication.

Answer 23

TRUE

10.3

Question 24

T/F Once a FAST PAK is put into operation, the IC shall ensure that a second FAST PAK is readily available at the scene to be used as required.

Answer 24

TRUE | 10.4

Question 25

T/F | Keep all couplings dry at all times. Water on couplings may freeze during low temperatures preventing connections.

Answer 25

TRUE | 10.5

Question 26

/T/F The FAST Unit shall report to and stage near the ICP, within VERBAL contact, at a position from which they can be readily deployed.

Answer 26

TRUE | MMID Ch2 Sec 3.2

Question 27

Officers of units reporting into the CP shall report in alone, after instructing their members to stand by at least___feet from the CP

Answer 27

At least 25 feet from the CP | Regs Ch 11 11.3.25

Question 28

T/F Use the downed members face piece unless it is damaged or missing instead of the facepiece with the FAST PAK.

Answer 28

TRUE | MMID Ch3 sec7.7

Question 29

T/F Once the member is located, a FAST PAK must be called for immediately, regardless of whether the member has air or not.

Answer 29

TRUE Statement | MMID Ch3 sec7.2

Question 30

T/F The air supply of the member needs to assessed whether the member is conscious or Unconscious?

Answer 30

TRUE Statement | MMID Ch3 Sec 7.1

Question 31

If the condition of the distressed members SCBA is in doubt DO NOT provide air via the___Pressure System

Answer 31

UAC HIGH Pressure system. | MMID Ch 3 7.4