B149.2 section 7 & 8 & 9 Flashcards
(15 cards)
What is section 7
Tank systems, filling plants, and refill centres
What are sections 7.1-7.5
GREEP
General
Relief valves
Emergency shut-off valves
Excess-flow and back check valves
Pressure gauges on tanks
What are sections 7.6-7.10
Liquid-level gauges on tanks
Filling of tanks
Installation of underground tanks
Discharge from tank relief valves
Location of consumer tanks
What is table 7.1
Maximum permitted filling density of a tank by liquid
volume (rotary or slip-tube gauge)
What is in table 7.2
Maximum permitted filling density of a tank by liquid
volume (fixed-liquid-level gauge)
What is table 7.3
Underground tanks
What are sections 7.11-7.16
T & F
Tank supports and
Filling plants
What is table 7.4
Location of above-ground tanks for consumer applications
What are sections 7.17-7.21
CFCDM
Container filling locations with provisions for container storage
Filling plants served by rail
Container refill centres
Dispensing system
Movement of tanks not designed for transportation or delivery of propane
What is table 7.5
Location of tanks at filling plants and container refill centres
What is table 7.6
Electrical classification
What is section 7.22
Operations and maintenance procedures
What is section 8
Tank trucks, tank trailers, and cargo liners
Also has repair garages
What is section 9
Vaporizers
What is 9.1-9.4
GIDT
General
Indirect vaporizers
Direct-fired vaporizers
Tank heaters
