Brainscape's Knowledge GenomeTM


Top Flashcards (Certified)
All Flashcards

AO Study Material 2020 Test > TB 176 - Seek Reveal Firepro TIC > Flashcards

TB 176 - Seek Reveal Firepro TIC Flashcards

(74 cards)

Start Studying
1
Q

The FirePro delivers high resolution thermal imaging and comes with a powerful how many lumen light emitting diode (LED)?

A

300-lumen

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Thermal imaging is not a technology desired to completely replace basic what?

A

Firefighting tactics

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

The TIC will provide information to a firefighter to be what?

A

Safe, make better decisions, and increased situational awareness

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

The reveal FirePro can be used when entering an IDLH such as what?

A

Interior fire attack, search and rescue, ventilation operations

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

Utilizing the TIC in the event a member encounters a what can increase situational awareness and survivability?

A

Mayday situation

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

The reveal FirePro is a what and one unit is assigned to each fire suppression position?

A

Inventory item

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

Members shall ensure that the TIC is accounted for and appropriately charged when?

A

Each morning and at relief

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

What uses does the reveal FirePro have?

A 
360s
Locating seat of fire
Locating hot spots
Identifying flashover conditions
Search and rescue
RIC
Mayday
Overhaul
Hazmat
Ventilation operations
Training
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

To turn on the TIC press and hold what button and until screen lights up?

A

Center button

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

For each of the set up screens, use the left and right button to navigated and what button as the selector?

A

Center button

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

For numerical fields, which buttons subtract and add from the displayed value?

A

Left subtracts, right adds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

To switch off the device, press and hold the center button for how many seconds until the screen goes dark?

A

2 seconds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

The user will be directed to an initial set up screen to select what?

A

Language, date and time formats

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

To access the menu, simultaneously press both the left and right button and hold for at least how many seconds?

A

1 second

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

Once in the menu screen, the menu allows the user to access what?

A 
Photo gallery
Switching temperature settings from Fahrenheit to Celsius 
Device settings
Flashlight
Device information
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

When selecting the gallery option, user can do what?

A

View and delete saved photos

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

When in the temperature option, this allows the user to switch between Fahrenheit and Celsius by using what button to make the preferred selection?

A

Center button

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

Selecting the device option gives the user the option to adjust what?

A

Date, time, and language

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

Selecting the device option also gives the user the ability to what?

A

Access flashlight and power settings
Switch the thermal watermark that shows up while scanning on or off
Restoring the device back to factory settings

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

What language options does the TIC have?

A

English, Spanish, French, or German

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

Selecting the “power” under the device option allows the user to modify what 2 settings?

A

Auto and display

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

In the “auto” option the user can choose whether the device will what after not interaction has been detected for a selected period of time?

A

Turn off

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

The “auto” is set to what as a default to ensure it will not accidentally power off during an emergency?

A

“Off”

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

When the auto is “on” it is set to a default of how many minutes which can be adjusted?

A

15 minutes

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
The “display” option under devices allows the user to adjust the brightness of the LCD between what ranges?
1 to 100%
26
When in the “display” option, hold what buttons to dim or increase the brightness of the LCD?
Left to dim, right to increase
27
The flashlight setting adjusts the brightness level of at settings and toggle the strobe feature which always uses 100% brightness to “on” or “off”?
“High” and “low”
28
What option of the flashlight is designed to help locate downed firefighters in visually compromised conditions?
Strobe light option
29
To engage the flashlight press what button on the TIC?
Side button on the RIGHT of camera
30
Pressing the button 4 times will toggle through what options for the flashlight?
“High”, “low”, “strobe”, “off”
31
Will the flashlight work whether the camera is on or off?
Yes
32
For the watermark, press what button to turn the seek thermal watermark present at the bottom left of the scanning screen on or off?
Center button
33
Selecting which option will restore then reboot the TIC back to factory settings requiring the user to re-enter time, date, and language?
Restore option
34
What does the about option do?
Provides serial number and firmware information
35
Each device has been registered with who?
LAFD equipment engineering unit
36
The temperature color bar visually displays a temperature range up to how many degrees?
1022 degrees
37
The lower number in the temperature bar identifies the temperature the image begins to what?
Colorize
38
Anything below the bottom temperature will appear what color with high dynamic range?
Black and white
39
Anything above the bottom temperature range will begin to what?
Colorize
40
What side of the screen is the seek thermal watermark located?
Left hand corner
41
The battery life is located in what side of the screen?
Bottom right corner
42
What 3 modes does the FirePro have?
Fire, survey, color
43
Which mode designed for locating hotspots and displays shades of black and grey which turn bright orange/red when areas of extreme heat are present?
Fire mode
44
Which mode is optimal for helping located downed firefighters or victims during search and rescue and has a monochromatic filter of different shades of blue which turn white around warmer areas?
Survey mode
45
Which mode is for demonstration and best suited for classroom training and highlights areas of heat in red with colorful borders as the temperature decreases?
Color mode
46
Can the FirePro take thermal imaging photos in all | Modes for after action review and training use?
Yes
47
To take a photo, press what button to capture image?
Right button
48
To cycle through the different modes press what button until selected mode is desired?
Left button
49
For photos, the temperature value at the center of the screen is saved to metadata of the image which can be see when viewed within what files?
Portable network graphics (PNG)
50
Images taken with the FirePro may be directly downloaded by removing what from the end of the camera and connecting the seek USB cable from the computer to the device?
Rubber back door
51
The FirePro will always save PNG metadata such as what but will not display spot temperature data if the reticle (cross hairs within eye piece) device is switch “on”?
Temperature
52
All members shall adhere to department bulletin number what “social media policy” when dealing with thermal photograph images from the FirePro?
17-03
53
All photographs taken with the reveal FirePro are property of who?
The LAFD
54
The battery symbol will have 4 bars if the battery is at what percent?
More than 85%
55
The battery symbol will have 3 bars if the battery is at what percent?
65% to 85%
56
The battery symbol will have 2 bars if the battery is at what percent?
33% to 65%
57
The battery symbol will have 1 bar if the battery is at what percent?
10% to 33%
58
The battery symbol will have 1 RED bar if the battery is at what percent?
Less than 10%
59
For the best results, the FirePro should be charged using what?
The SEEK USB charging cable
60
When the camera is off, the battery charge level will only appear when pressing what button?
Left or right
61
The FirePro will provide up to how many hours of use when fully charged?
4 hour
62
Is the FirePro waterproof, drop proof, and shock proof?
Yes, only waterproof when rubber back door is closed
63
What are the 2 approved methods for carrying and storing the FirePro on a members turnout coat?
In 1 of the radio pockets (when only 1 radio used) or in the facepiece pouch (for members utilizing 2 radios)
64
How often shall the FirePro be checked for damage and battery use?
Daily and after each use
65
If the FirePro is not functioning properly return it to who for evaluation?
LAFD equipment engineering unit
66
What is the recommended cleaning material for the lens of the FirePro?
Cotton swab and isopropyl alcohol
67
Do not use what on the screen of the device?
Window cleaners, harsh chemicals or solvents and never spray anything directly on screen of device
68
If the device will not power on, plug the device into wall with supplied wall charger or another what amp rated charger to ensure there is enough battery remaining?
1-amp-rated charger
69
You can perform a hard system reset by holding the CENTER button for how many seconds?
30 seconds
70
Battery power should be at least what percent to achieve optimal performance?
40%
71
If the battery is completely discharged and thermal | Imaging won’t start do what?
Charge battery and power on thermal camera
72
If the thermal image appears blurry you should do what?
Check that the lens is clear and clean and check if screen is clean
73
The flashlight will begin to dim when what happens?
Battery voltage drops to near empty
74
What does it mean when the camera keeps making a clicking noise?
The camera is adjusting and calibrating the image to achieve the best quality possible (perfectly normal)

AO Study Material 2020 Test (124 decks)

Brainscape helps you reach your goals faster, through stronger study habits.
© 2025 Bold Learning Solutions. Terms and Conditions