TOOLS 17 Multiversal Flashcards
The akron new yorker multiversal nozzle is a portable and fixed appliance. What is the max. pressure any part of this appliance should be subjected to?
200 PSI.
T.B. TOOLS 17 7.5
The multiversal has a safety stop to maintain stability when used in the portable base. At what degree is the safety stop positioned and what must be done to go below the safety?
35 degrees.
The unit must be secured in either the truck mount or by securing with ropes as outlined in 3.3.4
When securing the appliance with the rope procedure outlined at what point do you connect the hose lines?
After the appliance is secured.
Secure appliance 1st then connect hose
The use of 2 hose lines to supply the multiversal is recommended. When 2 lines are used what should be done to the lines?
Bring the lines straight back 15’ from the siamese parallel to each other before making any sharp bends or turns. T.B.TOOLS-17 3.4.2
What do you do if only 1 hoseline is used to supply?
Bring it straight back for 15’ before making any sharp bends or turns.
When the multiversal is being operated can you move it or the 15’ of supply hose?
NO. It must be shut down prior to moving.
The multiversal has a stacked tip. What are the sizes of the tips and what pressure should they operate at?
1 1/4”-100 PSI
1 1/2” - 70 PSI
2”- 50 PSI
T.B. TOOLS 17 3.4.5A
